PolishCoat

Quick guide

• Thoroughly clean the paintwork so that even stubborn dirt comes off. Dry the car. Shake the bottle well and dispense a small amount (2-4 pea-sized dollops) of polish onto the applicator/polishing pad.
• When using a machine, use a medium-cut or finishing pad depending on the hardness of the paintwork. On a clean pad, it is worth dispensing a little more product and spreading it evenly over the whole pad with a finger so that no dry spots are left. After that, 2-4 pea-sized dollops are enough. Work a small area at a time (approx. 30-50 x 30-50 cm). Use moderate speeds on the machine (approx. 700-1000 rpm with a rotary, speed setting 2-4 with a dual-action machine) and light pressure. Work the product evenly into the surface, about 3 passes, until it starts to turn transparent. Buff the surface with a clean microfibre cloth.
• When using by hand, it is worth applying a little pressure and using a foam or microfibre applicator, and working PolishCoat into the surface for the best result. Work a small area (approx. 30-50 x 30-50 cm) at a time. Spread PolishCoat onto the surface as an even film while applying pressure. The product does not require a separate drying time, so it can be buffed off immediately after working.

Source: Autodude quick guide on the product page.