Durable coating

ACE Coat, 30 ml

Name: ACE Coat, 30 ml
Brand: King Carthur
SKU: HS10857
Rating: 4.8 (47 reviews)

4.8 · 47 reviews Read reviews at Autodude

A durable coating for car paintwork that forms a long-lasting, glossy and hydrophobic protective layer. Can also be used on wheels and exterior plastic parts. Lasts up to 36 months / 50,000 km!

King Carthur ACE Coat is a ceramic coating that combines all the best properties of the finest coatings: long durability without compromising on gloss or hydrophobicity, and really easy application! ACE Coat creates a thick protective film on the surface with just one coat, which deepens the gloss of the paintwork and makes the treated surface slick and extremely dirt- and water-repellent, making it easier to keep the car clean and to carry out maintenance washes. The coating also protects against the sun's harmful UV rays, which fade paintwork and make it look worn. In addition to paintwork, this coating is also excellent for the car's exterior plastic parts, wheels and headlight lenses, so the whole car can be coated with a single product. ACE Coat creates a hard, clear protective film on the treated surface that withstands both wear and chemicals. The coating is extremely easy to apply, which makes it a good product for beginners or those who have applied coatings less often. VOC-free formulation! Incredible durability of up to 36 months or 50,000 km!

Available from Autodude in four countries

Each store serves its own country with local delivery, prices, returns and customer service.

Specifications

Product	King Carthur ACE Coat
Intended use	Protecting paintwork from dirt and UV radiation
Packaging	Plastic bottle with screw cap
Durability	36 months / 50,000 km
Package size	30 ml
Coverage	small cars approx. 20 ml, large cars approx. 30 ml
Operating temperature	+5 - +30°C
	Thick layer thickness
	Excellent repellency
	Very long durability
	VOC-free formulation
Withstands all car wash products	pH 2-12

As declared on the Autodude product page.

Sizes and variants

elkkä pinnoite, 30 mlView at Autodude
innoitussetti, 30 mlView at Autodude

Quick guide

Clean the car thoroughly to remove all dirt. Dry the car and finally wipe the surface with a finishing cleaner, e.g. KC Final Cleaner. If the paintwork has scratches or other defects, we also recommend machine polishing the surface before coating to achieve the best possible result.
Add a few drops or a thin line of coating to the applicator and apply a thin, even layer to the panel, first in an up-and-down direction, and then moving from right to left, applying light pressure. Leave the coating on the surface for 1-2 minutes, then wipe off the excess coating with a microfibre cloth. By reflecting light across the surface (e.g. a torch or phone light), check that no unevenness is left anywhere, because once dry, the coating can only be removed by machine polishing.
Allow the coating to dry for at least 12 hours (at approx. 20°C) before contact with water. Do not wash the car for 72 hours after treatment so that the coating can dry to its final hardness.
Note! Do not allow the products to freeze. Do not install in direct sunlight. Store in a cool, dry place.

Source: Autodude quick guide on the product page.