Car shampoo KING CARTHUR Ceramic Shampoo - Coating agents, 500 ml

King Carthur Ceramic Shampoo is a very slippery and effective cleaning, completely wax-safe car shampoo that is ideal for maintenance washes. The coating ingredients of Ceramic Shampoo create a highly dirt- and water-repellent protective film on the surfaces being washed. This protects the surfaces from, among other things, dirt sticking, which makes subsequent washes significantly easier. In addition, the shampoo strengthens the repellency of the wax or coating already on the surface and at the same time gives them additional protection, which extends their duration. When developing the shampoo, the starting point was to create a shampoo that leaves the most hydrophobic and long-lasting protective layer possible on both unprotected and protected paint surfaces.

King Carthur Ceramic shampoo focuses on protection and glide, the shampoo does not foam much. During the polishing phase, glide is definitely one of the most important things, as it softens the contact between the washing glove and the paint surface. Excellent glide effectively prevents dirt from rubbing against the surface, thus reducing the formation of washing scratches.

Ceramic Shampoo works without staining all exterior parts of the car, including glass surfaces, and the protective ingredients it contains even bind to the glass, increasing its repellency. A very effective concentrate, one bottle washes 25-30 cars! The shampoo is diluted in a ratio of 15-30 ml of shampoo to 10 liters of water, which is about 10 times more effective than typical supermarket shampoos. The most important thing, however, is that the substance only removes dirt from the paint surface, without damaging the existing protective layer. On the contrary, the shampoo creates a protective film on both clean (unprotected) and waxed or coated surfaces, increasing the repellency of the surface and extending the duration of the protective product underneath.

Features

• Product: King Carthur Ceramic Shampoo
• Intended use: Hand washing of the car after pre-washing
• Dilution ratio: 1:300 - 1:500
• Packaging: Plastic bottle with safety cap
• Package size: 500 ml
• pH neutral
• Wax-safe
• Suitable for all surfaces
• Exceptionally concentrated formula

Quick Guide

Pre-wash the car. Shake the bottle thoroughly before use, dilute the shampoo in a 1:300-1:500 mixture (15-30 ml / 10 liters of water) in a wash bucket. Use warm water if possible. This will help the shampoo mix as evenly as possible. Wash the car using a wash mitt, moving from top to bottom (cleanest to dirtiest), rinse and dry thoroughly. Remember to use the two-bucket technique! TIP : If you want to maximize repellency, add a few drops of shampoo directly to the wash mitt!

Shake well before use. Do not use in direct sunlight or on hot surfaces. Do not allow to dry on the surface. Rinse thoroughly with plenty of water.